Garden Projects
Fencing
In the UK most garden plots are divided using timber fencing. As it is more economical and immediate than walling or planting a hedge.
Panelled fencing
The most widely used method due to the flexibility, availability and easy erection.
Pressure treated timber posts are concreted approximately 18"-24" into the ground, a panel distance apart. Pre made panels are then secured to the upright posts using brackets and or screws. A cap or finial should be secured to the top of each post to protect it from the weather.
If the panels are in contact with the ground, gravel boards should be used beneath the fence to prevent moisture rising and damaging the fence.
Prices for panelled fences vary depending on the height, quality and type.
Close board fencing
A more expensive fencing method than panel fencing but much stronger and more durable. Each pressure treated post is positioned and held in place, while the shaped end of an arris rails is inserted into the pre-cut slots in the post. The next post is then erected, slotting the other end of the arris rail into place. This method continues until the full length of the proposed fence is complete. Before the posts are concreted the fence needs to be made level. When the concrete has set the close board panels can be secured to the arris rails with nails or screws.
Erecting fence posts
Fence posts need to be firmly secured to the ground. This can be acheived with Metpost post spikes, which are driven into the ground with a sledge or club hammer and post driving tool, Metpost bolt-downs which as the name suggests are bolted to a concrete slab, brickwork or decking. The third and cheapest solution, but which takes the longest to set up, is to dig post holes and back fill with post mix. Which ever method you use, when erecting, keep checking that the post is square, at right angles to the run of the fence, and with the aid of a spirit level that the post is plumb on both the front and side faces.
Fencing Tips:
Pre drill holes in trellis and fencing before using galvanised nails or screws - this prevents the wood from splitting.
Paint the trellis and posts before you erect the fencing.
To reduce the rotting of fence posts, stand them in a container of preservative for a couple of hours before using.
If you are adding to exisiting fencing, make sure you start with the post closest to the current fencing.
